HA-ⅠComputer Control Bearing Heater Electromagnetic Induction Gear Quick

Description

eBay
HA- C Computer Control Bearing Heater Electromagnetic induction gear quick release installation Bearing Heater
1. Purpose
HA series heaters are mainly used to heat various types of metal parts such as bearings, gears, bushes, shaft sleeves, diameter rings, pulleys, shrink rings, connectors, etc., and expand them through heating to achieve interference assembly. Need.
2. Structure
The HA series heater is installed on the trolley by the combination of the main engine and the control box. The mobile structure is convenient for on-site construction and flexible application. The removable iron is directly used to wear bushings or other heating workpieces. This series of heaters All the irons are equipped with rotating beams, which are more convenient to use.
3. Advantages
1. Clean
Traditional methods, such as fire roasting, oil boiling, and oven roasting, are not only costly, but also produce coke smoke, odor and waste oil, which waste time and energy. The application of induction heaters can replace traditional methods and create a clean working environment.
2. Fast and no damage
After heating, the bearing expands outward in the cylindrical direction, which can avoid damage during installation. Induction heating is a good heating method, and it does not need to be preheated. Depending on the weight and size of the bearing, it can be heated to 120°C in a few seconds or minutes without damaging the pre-lubrication.
3. Reasonable design
In order to meet the requirements of the industrial environment, the design concept of the heater is modern, rational, easy to operate, and highly durable.
Model HA- C
Rated power 1.1KVA
Rated voltage 220V
Workpiece inner diameter 30-50mm
Outer diameter/height 160/100mm
Dimensions 400*290*345mm
The weight of the machine is 23kg.
|Heating temperature|MAx. 250C
Control method | temperature control, aging, manual control
Model HA- I
Rated power 2.2KVA
Rated voltage 220V
Workpiece inner diameter 30-70mm
Outer diameter/height 250/1 10mm
Dimensions 400*290*345mm
The weight of the machine is 29kg.
|Heating temperature|MAx. 250C
Control method | temperature control, aging, manual control
Model HA- 2
Rated power 3.3KVA
Rated voltage 220V
Workpiece inner diameter 70-100mm
Outer diameter/height 360/110mm
Dimensions 400*290*345mm
The weight of the machine is 31kg.
|Heating temperature|MAx. 250C
Control method | temperature control, aging, manual control