HA-1 Bearing Heater Heating Quick Disassembly Installation Equipment Rated Power

Description

HA-1 Computer Control Bearing Heater Electromagnetic Induction Equipment 220V
Does not support 110V
Description:
- HA-1 bearing heater is installed on the trolley by the combination of the main engine and the control box. The mobile structure is convenient for on-site construction and flexible application. The removable iron is directly used to wear bushings or other heating workpieces. This series of heaters All the irons are equipped with rotating beams, which are more convenient to use.
- This machine is recommended for household occasional heating, working time should be controled within 30 minutes.
Working Principe
HA series heaters are mainly used to heat various types of metal parts such as bearings, gears, bushes, shaft sleeves, diameter rings, pulleys, shrink rings, connectors, etc., and expand them through heating to achieve interference assembly.
Features
1. Clean
Traditional methods, such as fire roasting, oil boiling, and oven roasting, are not only costly, but also produce coke smoke, odor and waste oil, which waste time and energy. The application of induction heaters can replace traditional methods and create a clean working environment.
2. Fast and no damage
After heating, the bearing expands outward in the cylindrical direction, which can avoid damage during installation. Induction heating is a good heating method, and it does not need to be preheated. Depending on the weight and size of the bearing, it can be heated to 120°C in a few seconds or minutes without damaging the pre-lubrication.
Specification:
Model: HA-1
Rated power: 2.2KVA
Rated voltage: 220V
Workpiece inner diameter: φ30-70mm
Suit for Outer diameter: <φ250mm
Suit for Width: <φ110mm
Heating rod size: 20x20mm / 40x40mm
Machine weight: 29kg
Dimension: 48x37x43cm